Disclaimer

The information contained in this website is for general information purposes only. The information is provided by DNK Services Ltd and whilst we endeavor to keep the information up-to-date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk.

Please check with the manufactures of your windows and doors if you intend to screw the sash jammers, Restrictors or Door Chains on to them yourself, This may invalidate your Warranty. 
These devices are an added extra secutiry, It is not advised to leave Windows and Doors open while out with any of the above fitted. These are not gauranteed to stop access to your property.

We try our best to match the Profiles by the information you give, to get a Close match of your Door to Panel we would need the 'C' number, but please be aware that this will be the colour of the Door/Profile when it was new, It may have faded.
If no Profile Name, Make or C number given we will use a Standard White which is c121/c160 / 830
We do not guarantee to match your existing door colour even with 'C' number, unless door is Brand new and supplied by us.

Glass supplied in the door panels is usually either 4mm toughened 
The glass market does not offer a small number of our glass patterns in either due to the size and popularity. By Selecting any of the panels below, Selcting none conformin glass and accepting the Terms and conditions means you are aware that none regulated glass will be used.

The panels affected are:

• Wilson / Windsor 2 (Top small units)
• Wilson / Windsor Side (Top small unit)
• Carter / Sandringham Side
• E5034
• E5065
• E5113
• E5123 

Available glass options for the above are as follows if you wish to change to a Toughen alternative:

• Clear
• Autumn
• Costwold
• Stippolyte
• Everglade
• Sycamore
• Sandblast – Surcharge applicable
• Satin – Surcharge applicable 

Panels

• Panels may have different names on paperwork, still same design, Embossing may differ slightly due to different manufactures.
• All Panels are Embossed, (Stands out) unless noted in description, i'e, Inverted. All panels are vacuum formed to create designs.
• All Panels have a protective clear film to protect the panel during manufacturing process, this will need to be removed prior to fitted.
• Condensation within Glazed Unit- Panels are required to be left for a period of 2 weeks after installation from the point of first appearance to allow the desiccant to work fully.
• The Spacer bars used in the panels are Charcoal Grey
• Remove the protective clear or blue film prior to installation, once the Panel is fitted you should to run a small bead of silicone around the glazing aperture where it meets the glass, also check the Letterbox screws and sealant to be applied between Letterbox and UPVC Skin. This is in compliance with the Manufacturer Guarantees
• If panels are to be cut to size out of a larger panels, No offcuts will be sent with order.
• Due to the nature of materials used and the method of manufacture of panels, there is a tolerance of + or – 3mm to the cut size and + or - 1.5mm to the thickness of every infill panel. A 10mm allowance on the aperture opening should be allowed.
• Holes in panels, i.e for Cat or dog flaps are done manually with a jig saw, there is a tolerance of + or – 3mm to the cut size 
• Uncut panels, Panels that are maximum sizes will not be trimmed down at the edges, These maybe oversized by 10mm-15mm
• Due to Lead work and other artwork done by hand this may differ from illustrations on the website and in brochures
• Occasionally the letterbox may move out of line, if this happens there are two screws under the flap that can be loosened to straighten the letterbox and then re-tighten, this is not a fault and no claim will be upheld

UPVC Doors, Composite Doors and UPVC Windows

• Composite Door Descriptions, Colours and Unique Features. Every effort is made to ensure that the products we supply correspond as closely as possible to the examples shown in this brochure. Due to the limitations of the photographic and printing processes, colour illustrations should be used as a guide only. DNK Services Limited provide a standard white door slab and cannot guarantee that the door slab will match any frame used. Due to a continuous development programme DNK Services Limited reserve the right to alter specifications without prior notice.
• All specifications are correct at the time of going to print. Door slabs, Flores, Kara and Marmara glass images are supplied courtesy of Distinction Doors Limited. E. & O. E. *PVC Foiled Rosewood frame is not an exact colour match to the GRP Rosewood door slab.
• Composite doors are all White internal unless otherwise stated.
• The Spacer bars used in the composite door are Charcoal Grey
• Once a composite door is fitted you should to run a small bead of silicone around the glazing aperture of the cassettes, also check the Letterbox screws and sealant to be applied between Letterbox and Door Skin if moved, This is in compliance with the Manufacturer Guarantees
• Composite doors are Factory 'Bench' made. any over-weld on corners can be snipped off or knife off carefully, Once the door has been fitted you may need to adjust locks and hinges to make sure the door is working smoothly,
• If no RAL colours are given the Composite doors will be made in the Standard Colours - Composite Door Colours - Click Here
• Occasionally the letterbox may move out of line, if this happens there are two screws under the flap that can be loosened to straighten the letterbox and then re-tighten, this is not a fault and no claim will be upheld 

DNK Services Ltd recommends that proper professional advice be sought before any action is taken with all structural and building matters.

No part of this web site may be reproduced without prior permission.